Brookfield KU-1 Viscometer Uživatelský manuál stáhnout pdf (Strana 5)

Brookfield Engineering Labs., Inc. Page 5 Manual No. M/97-241-B1101

I.4 Can Specifications

Container Dimensions

Can Height Bottom Flange Diameter

U.S. Pint 3.850" (9.78 cm) 3.385" (8.60 cm)

U.S. Half Pint 2.850" (7.24 cm) 2.875" (7.30 cm)

U.S. Quart 4.845" (12.31 cm) 4.230" (10.74 cm)

If you have a requirement for container dimensions other than those listed above, please contact

Brookfield or an authorized Brookfield agent.

I.5 Utilities

Input voltage: 115 VAC or 230 VAC

Input frequency: 50/60 Hz

Power consumption: 20 watts

Power cord color code:

USA Outside USA

Hot (live) Black Brown

Neutral White Blue

Ground (earth) Green Green/Yellow

I.6 Printer Connection

The KU-1+ is equipped with a parallel printer

port located on the side of the instrument allow-

ing printing with a parallel printer. A standard

parallel printer cable (25 pin, Type D Centronics,

available from Brookfield as part number CAP-

86) is used to connect the viscometer to the

printer.

When connected to a printer, the KU-1+ will

print one line of data each time the "Hold Read-

ing" switch is moved to the down position.

The data line includes the viscosity (in Krebs

Units) and the associated weight (in grams):

715g 125.9KU

Dashes in the printout indicate an "over-range"

condition or that the handle has risen to the top position (i.e. the spindle is not rotating):

- - - - g - - - . - KU

Note: When connecting the ca ble to the KU-1+, THE PRINTER POWER (AC mains) SHOULD

BE "OFF"!

PARALLEL PRINTER

OUTPUT CONNECTION

Pin Function

1 STB

2D0

3D1

4D2

5D3

6D4

7D5

8D6

9D7

25 GND

Figure 4

1 2 3 4 5 6 7 8 9 10 11 12 13

Komentáře k této Příručce

Žádné komentáře

Brookfield KU-1 Viscometer Uživatelský manuál Strana 5

Komentáře k této Příručce

Související produkty a manuály pro Měřící nástroje Brookfield KU-1 Viscometer