Brookfield DV-III Ultra Rheometer Uživatelský manuál stáhnout pdf (Strana 47)

Brookeld Engineering Laboratories, Inc. Page 47 Manual No. M98-211-E0912

Command Command Description Parameter Comments

SSP Set spindle 31 set to a number 31 spindle

SSN Set viscometer speed 100.0 run at 100 RPM

SPI Set print interval 00:05 begin printing data at 5 second

intervals

WPT Wait for % torque 85.0 wait until % torque = 85; a curing

cycle

Program 4: Spring relax

Command Command Description Parameter Comments

WKY Wait for a key press Wind to 100% tell operator to wind spindle

until 100% torque is reached

WPT Wait for % torque 100.0 wait until 100% torque is reached

WKY Wait for a key press Release spindle tell operator to release the spindle

SPI Set print interval 00:01 begin printing data at 1 second

intervals

WPT Wait for % torque 0.0 wait for spindle to completely

unwind to 0% torque

Program 5: Variable speed

Command Command Description Parameter Comments

SSN Set viscometer speed 50 run at 50 RPM

WTI Wait for time interval 00:10 wait for 10 seconds

PDN Print data point now print one data point

SSN Set viscometer speed 10 run at 10 RPM

WTI Wait for time interval 00:10 wait for 10 seconds

PDN Print data point now print one data point

SSN Set viscometer speed 20 run at 20 RPM

WTI Wait for time interval 00:10 wait for 10 seconds

PDN Print data point now print one data point

SSN Set viscometer speed 50 run at 50 RPM

WTI Wait for time interval 00:10 wait for 10 seconds

PDN Print data point now print one data point

IV.3.2 Running B.E.V.I.S Programs in Standalone Mode

The B.E.V.I.S. program menu is accessed by pressing the PROG key and selecting number 2,

2 = B.E.V.I.S. The loading and execution of B.E.V.I.S. programs are described in the following

sections.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 132 133

Žádné komentáře

Brookfield DV-III Ultra Rheometer Uživatelský manuál Strana 47